Siemens 547-324A, RCM FM BAC +/-.50"WC( 125PA)0.5%FS

Siemens 547-324A,
Siemens, SRCM Room Condition Monitor, RCM FM BAC +/-.50WC( 125PA)0.5%FS
The SRCM, Siemens Room Condition Monitor, is a touch screen, flush mounted monitor that is typically located outside of a pressurized room, such as an Operating Suite or Isolation Room. In a hospital, laboratory, or animal research facility, the integrity of the ventilation control system is at the heart of a contaminant-free environment. Whether a room is to be maintained at a negative pressure to prevent contaminants from escaping into adjacent areas or positive pressure to protect patients with compromised immune systems, the proper pressurization of the room is essential. To assure proper pressurization is maintained in these critical environments, a room pressure monitor is employed to measure and alert staff and personnel of any change in pressure - no matter how small. A fail-safe solution to monitoring these very low pressure changes is the Model SRCM Room Condition Monitor, which uses highly accurate capacitance sensing technology to measure and display true low pressure differential to a resolution of 0.00001. in water column (WC).

Item Specifications

• Features

  Functions

  Benefits

• High resolution color touch-screen display Immediate feedback on room status
  Intuitive graphic interface  
• Two-in-One eliminates the need for a second monitor Display both pressure and room condition
  On-board and remote sensing capability Reduced costs
• Flush-mount design No visible mounting fasteners
  Snap-in flush bezel
  Face is sealed for cleaning or wipe-down  
• True pressure measurement High accuracy low differential capacitance technology
  Dead ended solution
  Standard on-board sensor and optional remote sensor High accuracy
  No contamination or clogging
  two measurements in one
  Measure very low pressure changes
• Ease of installation Mounts in off-the-shelf electrical gang box
  Four-screw, self-leveling mount
  Labeled, removable termination strips Ease of installation
• Clone Configuration Display rotates up for acceSS to USB port
  Cloning of configurations for multiple unit installation via USB port Efficient setup for common RCM's
• Setup Display Banner User Defined Text for flexible room name
  Room Status: Change room from Isolation to No Isolation Customized to every installation/room
  Local acceSS for fast room type change
• Setup Display Advanced Display Display Contrast
  Display Averaging Display pressure Enable password Change brightneSS of display
  Improve display resolution in unstable ambient pressure environments
  Display primary and secondary or toggle between 2 rooms
  Administrator and Supervisor available.
• Setup Unit Operation Setup primary and secondary room
  Change analog output
  Free form data entry for room name Flexible setup
  Flexible IO
  Flexible room naming
• Multiple Communications Options BACnet MSTP
  Siemens P1 Flexible to meet the installation requirements
• Alarm capabilities Local audible and visual alarming
  Remote annunciator alarming capability
  Alarm delay feature Flexible Monitoring
  Remote monitoring
  Prevent nuisance alarms
• Multiple Room Support The SRCM can be used to display the status of two rooms.
  Second pressure sensor is required