Healthy Building Solutions 3+1. Smartlink is the Airthings proprietary long range and low power IOT protocol. Smartlink connections from the Hub to Airthings devices can typically penetrate 3 thick walls/floors or 10 drywalls (non-loadbearing walls). Install multiple Hubs if more range is needed. Devices will connect to the closest Hub. The mounting bracket allows for placing the HBS Solution products on a flat surface or fixing it with double-sided tape or screws to the wall.
PRODUCT FEATURES HBS Hub
Live data streaming from Airthings devices to the cloud with
ethernet cable or pre-inserted eSIM/SIM card.
In case ethernet is used, Airthings recommends that the Hub is
connected to a local network, protected by a firewall.
LED status indicators: Power, cloud and device connection.
Can support connections to up to 30 HBS Wave Plus and HBS Wave Mini
SPECIFICATIONS HBS Wave Plus & HBS Wave Mini
Operational Environment (Temperature, Relative Humidity):
Wave Plus: 4 oC to 40 °C / 10 - 80 % (non-condensing)
Others: 4 oC to 40 °C / 10 - 90 % (non-condensing)
Operation in temperatures < 0 deg C or relative humidity > 90 %
can cause permanent damage to the products
Hub power supply: 100–240 V AC / 50–60Hz
Protocols: Airthings Smartlink based on 802.15.4.g
SmartLink frequencies: 868/915MHz (Europe/US/CA)
Hub Cellular Modem: LTE Cat M1 (4G), Cat NB1 (NB-IoT 4G
supported with future SW upgrade) and EGPRS (2G).
Firmware updates are automatically downloaded and installed over the air ( OTA ) via the HBA Hub